Tiegel home Talk to a metallurgist

Make-up ball size calculator

Enter the mill feed size, ore properties and mill conditions to estimate the make-up ball size. Round to a standard size your supplier makes.

Results

The example values are filled in so you can see how it works. Results update as you type.

The formula

dB=25.4[(F80K)0.5×(ρsWi100φc3.281D)1/3]

where

dB
largest (make-up) ball diameter (mm)
F80
80% passing size of the mill feed (µm)
K
mill factor: 350 for wet overflow mills, 330 for wet grate-discharge mills, 335 for dry grate-discharge mills
ρs
ore specific gravity
Wi
Bond ball mill work index (kWh/t)
φc
mill speed as a fraction of critical speed
D
mill diameter inside the liners (m); 3.281 converts metres to feet

Want the background? Read Grinding media: ball size selection, ball charge mass and wear prediction.

Discuss your plant with a metallurgist

Tiegel is a Perth metallurgy company. We help with testwork, plant optimisation, metal accounting and investigations.

Talk to a metallurgist

These calculators use standard published formulas and are provided as a guide. Check results before relying on them for design or reporting.