Asad Ali is a consulting metallurgist at Tiegel, based in Perth. He holds a Master of Engineering (Chemical Engineering) from Edith Cowan University and a Bachelor of Petroleum and Gas Engineering. He is completing a PhD in Mining and Extractive Metallurgy at Curtin University.
Articles by Asad Ali
Commissioning a mineral processing plant: phases, tools and checklists from construction to steady state
Commissioning a processing plant step by step: phases and certificates, Gantt chart, punch lists, checklists, RACI, ramp-up and performance tests.
Plant availability, utilisation and OEE: accounting for lost hours and tonnes
Define and calculate availability, utilisation, MTBF, MTTR and OEE for a processing plant, with a time model and worked example.
Process control for metallurgists: PID loops, step tests and lambda tuning
PID control for metallurgists: how loops work, reading a step test for gain, dead time and time constant, and lambda tuning with a cyclone density example.
Metallurgical recovery from assays: two- and three-product formulas with worked examples
Calculate plant recovery from feed, concentrate and tailings assays. Two- and three-product methods, worked examples and the errors to avoid.
Mass balance data reconciliation for mineral processing plants: weighted least squares and the chi-square test
Why plant balances never close, how weighted least squares reconciles them, and how a chi-square test separates noise from real errors.
Gold reconciliation from resource model to gold bar: F-factors, gold in circuit and scheduling effects
Reconcile a gold mine from resource model to bar: F1, F2, F3, the plant balance, measuring gold in circuit, and how scheduling skews recovery.
Ore blending for the mill: blend grade, the lever rule and throughput on mixed ores
Blend ore for the mill: tonnage-weighted grade, the two-source lever rule, why throughput on a blend is not the average, and how to run a blending plan.
Month-end metal accounting: check-in, check-out, unaccounted metal and the AMIRA P754 code
How a plant closes its month: check-in and check-out, change in gold in circuit, unaccounted metal, calculated head and the AMIRA P754 code principles.
Minimum sample mass with Gy's formula: sampling theory for metallurgists, with a worked protocol
Use Gy's formula to find the minimum sample mass for a particle size and precision, and check a sample preparation protocol stage by stage.
CUSUM charts for metallurgical plants: early detection of small changes in recovery
Build a CUSUM chart to catch small, lasting changes in plant recovery or grade sooner than daily charts, with a worked example and alarm rule.
Assay quality control: standards, blanks and duplicates, and interpretation of control charts
Monitor assay quality with standards, blanks and duplicates: control charts, bias, z-scores, HARD and pooled precision, with examples.
Sampling system design: cross-stream cutters, increment mass and sample stations
Design plant sampling systems: cross-stream cutter opening and speed, increment mass, number of increments, sample stations and the common faults to avoid.
Root cause analysis for metallurgical plants: a structured investigation method
A practical root cause method for recovery losses and plant problems: define, check data, list and rank causes, run fair trials, verify.
Reagent dosing calculations: g/t, solution strength and pump flow
Convert a reagent dose in g/t into a dosing pump flow, make up solutions by % w/v and % w/w, and dilute flocculant, with plant examples.
Ore specific gravity by pycnometer and its use in plant calculations
Measure ore specific gravity with a water pycnometer, calculate SG from four weighings, and back-calculate solids SG from pulp density.
Slurry pipelines: deposit velocity, pipe size and pump power with Durand's equation
Choose a slurry pipe size that keeps solids moving with Durand's deposit velocity, then calculate pump power, with a worked example.
Plant water balance: tailings water, decant return, evaporation and make-up water
Build a process plant water balance: water in slurry, water locked in tailings, pond evaporation, decant return and raw water make-up, with examples.
Rapid work index estimates from plant samples: separating ore hardness from grinding circuit performance
Estimate the Bond work index from a few batch grinds, then judge grinding circuit changes at equal ore hardness. Method and worked example.
The Bond ball mill grindability test: procedure, work index calculation and worked examples
Step by step: the 285-ball charge, 700 cm³ feed, 250% circulating load, Gbp and the Bond work index equation, with worked examples.
Ball mill sizing with Bond's method and Rowland's efficiency factors: a worked example
Size a ball mill step by step: Bond specific energy, Rowland efficiency factors EF1 to EF8, pinion power and mill dimensions, with a fully worked example.
Grinding media: ball size selection, ball charge mass and wear prediction
Choose the make-up ball size with the Rowland and Kjos equation, calculate ball charge mass, and estimate ball wear from the abrasion index.
Crushing: the Bond impact work index test and crusher energy calculations
How the Bond impact crushing work index is measured and used to estimate crusher energy, with reduction ratios and a two-stage crushing worked example.
Crushing circuit design: crushing rate, reduction ratio, closed-circuit screening and stockpile sizing
Size a crushing circuit: design crushing rate from utilisation, reduction ratio per stage, closed-circuit screen loads and live stockpile capacity.
Particle size analysis: sieving, cumulative percent passing and P80 calculation
How to run a sieve analysis, calculate cumulative % passing, interpolate P80 between sieves, and fit Rosin–Rammler or Schuhmann size distributions.
Hydrocyclone performance: partition curves, cut size and bypass from a cyclone survey
Calculate a hydrocyclone partition curve from survey data, find the cut size d50c and water bypass, and estimate cyclone size with Arterburn's method.
Thickener sizing from settling tests: the Coe–Clevenger and Talmage–Fitch unit area methods
Size a thickener from cylinder settling tests with the Coe–Clevenger and Talmage–Fitch unit area methods, with a metric worked example.
Screening efficiency: calculating the size separation achieved by a screen
Calculate screen efficiency from feed, oversize and undersize sizing, and see why near-size particles and worn panels limit it.
Filtration testwork: vacuum leaf tests, cake resistance and filter area
Run a vacuum leaf test, calculate filtration rate and cake moisture, find cake resistance from a t/V plot, and size a filter.
Thickener operation: bed level, flocculant dosing, rise rate and troubleshooting
Operate a thickener well: rise rate and solids loading, flocculant dose to pump flow, bed level and bed pressure control, and a troubleshooting guide.
Settling velocity: Stokes' law, Newton's law and hindered settling in slurries
Calculate particle settling velocity with Stokes' law, check the Reynolds number, use Newton's law for coarse particles, and correct for hindered settling.
Gravity concentration: the concentration criterion, settling velocity and recovery calculations
When gravity separation works: the concentration criterion, Stokes' law settling, equipment choice and recovery per pass, with examples.
Magnetic separation of iron ores: drum separators, WHIMS and the Davis tube test
How magnetic separators work, LIMS for magnetite and WHIMS for hematite, the magnetic force equation, and the Davis tube test with a worked example.
Flotation kinetics testing: rate constants and scale-up from laboratory to plant residence time
Run a timed laboratory flotation test, fit first-order and Klimpel rate models, and turn laboratory flotation time into plant residence time.
Flotation cell sizing: from laboratory flotation time to cell volume, cell numbers and column area
Size a flotation bank step by step: slurry flow, scale-up factor, air allowance, number of cells, conditioners and column area, with a worked example.
Flotation reagents and froth: collectors, frothers, modifiers and gas dispersion
How collectors, frothers and modifiers work, how to measure superficial gas velocity and bubble surface area flux, and what the froth does to recovery.
Flotation circuit surveys: planning, sampling, mass balancing and size-by-size recovery
Run a flotation circuit survey: steady-state checks, sample points, two-product and least-squares mass balancing, and size-by-size recovery analysis.
Gravity recoverable gold: interpreting the GRG test for circuit design and metal accounting
What gravity-recoverable gold (GRG) testing measures, how to read the result, why plants recover less, and what it means for design.
CIL and CIP gold circuits: choosing between them and tracing gold losses
How CIL and CIP gold circuits differ, when each is used, and how tank profiles show whether gold is lost in the leach or on carbon.
Dissolved oxygen in gold cyanidation: its effect on leach rate and how to control it
Why dissolved oxygen often limits gold leaching, the cyanide-to-oxygen ratio, what consumes oxygen, and how plants raise and measure DO.
Bottle roll cyanide leach testing: procedure, extraction and reagent consumption
How a bottle roll cyanide test is run, and how to calculate gold extraction, calculated head, and cyanide and lime consumption, with a worked example.
Free cyanide and protective alkalinity in leach solutions: silver nitrate and acid titrations
Silver nitrate titration for free cyanide step by step: the calculation, end points and interferences, plus the acid titration for lime.
Activated carbon in gold plants: activity testing, adsorption isotherms and carbon loading
Carbon activity tests, Freundlich isotherms, the Fleming k and n rate model and CIL carbon loading balances for gold plants, with worked numbers.
Electrowinning calculations: Faraday's law, current efficiency and specific energy
Faraday's law, current efficiency and energy per kilogram for electrowinning, with worked examples for a gold cell and a copper tankhouse.
Merrill-Crowe zinc precipitation: process steps and calculations
How Merrill-Crowe recovers gold and silver from cyanide solution with zinc dust: clarification, deaeration, zinc dosing and efficiency.
Carbon elution: AARL and Zadra stripping, bed volumes and elution efficiency
How gold is stripped from loaded carbon by AARL and Zadra elution, with bed volume, eluate grade and elution efficiency calculations.
Cyanide destruction: reagent calculations for SO2/air, hydrogen peroxide and Caro's acid
Reagent calculations for cyanide destruction: SO2/air, sodium metabisulphite, lime, hydrogen peroxide and Caro's acid, with a worked example.
Diagnostic leach and preg-robbing tests: locating unrecovered gold
Find where unleached gold is locked with a diagnostic leach, and measure gold loss to carbonaceous ore with a preg-robbing test.
Oxygen uptake testing: measuring the oxygen demand of leach slurry
Measure the oxygen uptake rate of a leach slurry, convert it to oxygen demand per tonne, and use it to size aeration or pre-oxidation.
CIL circuit modelling: leach kinetics in tanks in series, carbon loading and soluble gold loss
Model a CIL circuit: first-order leaching in tanks in series, residue grade, gold onto carbon, carbon movement and soluble loss, with a worked example.
Gold room operations: electrowinning sludge, drying, smelting and doré accounting
How a gold room works: sludge handling, drying, fluxing and smelting, doré fineness and troy ounces, slag treatment, security and the gold room balance.
Pressure oxidation and bio-oxidation of refractory gold: chemistry, oxygen demand and acid
How pressure oxidation and bio-oxidation free gold locked in sulphides: reactions, oxygen and acid per tonne of sulphur, and sulphide oxidation.
Roasting refractory gold concentrates: two-stage roasting, sulphur dioxide and calcine
How roasting frees gold from sulphides and carbon: two-stage roasting for arsenic, oxygen, air and SO2 per tonne of sulphur, calcine mass and gas handling.
Cyanide speciation: free, WAD and total cyanide, HCN and pH, and the 50 mg/L WAD limit
Free, WAD and total cyanide explained: what each includes, how they are measured, how pH sets the HCN share, and why WAD is used for tailings limits.
Carbon regeneration: acid washing, thermal reactivation and carbon activity
Why activated carbon loses activity, how acid washing and kiln reactivation restore it, kiln sizing, activity ratio and carbon loss per tonne of ore.
Agitator design for leach and CIL tanks: power number, tip speed and solids suspension
Agitator basics for leach and CIL tanks: impeller power from power number, tip speed, torque, power per cubic metre and the Zwietering suspension speed.
Gravity circuit design: centrifugal concentrators, underflow bleed and gravity gold recovery
Design a gold gravity circuit: why free gold builds up in cyclone underflow, how much underflow to treat, a simple recovery model and intensive leaching.
Heap leach column tests: procedure, solution-to-ore ratio and scale-up to the heap
How heap leach column tests are run: application rate, solution to ore ratio, extraction from daily solutions, and scaling to a heap.
Solvent extraction: isotherms, McCabe-Thiele diagrams and the number of stages
How solvent extraction moves metal between phases, and how a McCabe-Thiele diagram sets the number of stages, with a copper example.
Copper heap leach, solvent extraction and electrowinning: copper transfer, acid and current
Copper heap leach SX-EW explained: copper transferred from PLS flow and grades, acid regenerated in electrowinning, cell current and energy per tonne.
Hard-rock lithium processing: dense media separation and flotation for spodumene concentrate
How spodumene concentrators reach 6% Li2O: dense media for coarse ore, fatty acid flotation for fines, and magnetic separation for iron.
Heavy liquid separation of spodumene ore: test procedure and washability analysis
How heavy liquid separation predicts dense media results for spodumene: procedure, cumulative grade and recovery, and Li2O conversions.
Spodumene dense media separation plant design: cut densities, ferrosilicon medium and cyclone sizing
Design a spodumene DMS circuit: two-stage cut densities, ferrosilicon medium make-up, medium to ore ratio, cyclone feed head and partition curve Ep.
Lithium hydroxide from spodumene: calcination, acid roast, conversion and LCE calculations
How spodumene concentrate becomes lithium hydroxide: calcination, sulphuric acid roast, leaching, purification, causticisation, and LCE and reagent ratios.